Note: The displayed value for the lowest harness slot is measured WITH the infant insert/support cushions
Note: The displayed value for the lowest harness slot is measured WITH the infant insert/support cushions
Carrier weight (not including base): 8 lbs
Seat weight (carrier and base together): 14.6 lbs
Seat width: 15.5"
Number of (crotch) buckle strap positions: 2
Lowest harness position: 6"
Crash replacement policy: If car seat is in a crash, it must be replaced. DO NOT use it again! A crash can cause unseen damage and using it again could result in serious injury or death.
Center seat lower anchor installation: Borrowing the inner bars of the outboard LATCH positions is allowed if LAs are spaced over 11 inches apart and vehicle maker approves for RF-only seats with hook-on or Push-on/InRight connectors as found on this base
Vehicle seat protector policy: A thin towel to protect your vehicle seat is permitted.
Inflatable seat belt policy: Graco now allows the use of Ford vehicle lap shoulder inflatable seat belts with rear-facing only infant car seats when installed without the base. This includes all SnugRide® Click Connect™ models (without base), and all SnugRide® SnugLock® models (without base). At this time, Graco still does NOT allow the use of inflatable vehicle belts for installation with rear-facing only infant car seats installed with a base. Graco strongly encourages consumers to utilize the LATCH system for rear-facing only infant car seats installed with a base.
Infant insert/cushioning use: The body support can ONLY be used for infants 12 lb (5 kg) or less.
Other ways the seat can be outgrown (aside from height or weight limits): The top of child’s head must be at least 1 inch (2.5 cm) below top of child restraint.